Menu

Testing Services

Test House

CIRCOT is one of the world's renowned cotton testing laboratories and it is the only referral laboratory in our country for testing cotton textiles. It also has the accreditation from National Accreditation Board for Testing and Calibration Laboratories (NABL), Ministry of Science and Technology, Government of India, New Delhi since 1999. CIRCOT’s state of the art laboratories have facilities for testing over120 tests on different textile materials. These facilities are open to all the textiles mills, government departments and marketing sectors. CIRCOT is one of the two Indian laboratories recognized by the Bureau International pour la Standardisation des Fibres Artificielles (BISFA), an international association of man-made fibre producers, for testing manmade fibres.

 TEST FEE SCHEDULE - JUNE 2018

 Sr No
  Test Fee per sample ( ₹) Test Fee

Min Sample Size

seed cotton
1 TESTS ON FIBRE
  1 Ginning percentage by Laboratory Model Gin (seed cotton)
300 1 Kg seed cotton
  2 Ginning percentage by Commercial Gin (seed cotton)
500 20 Kg seed cotton
  3 Percentage of Moisture ( IS 199  ) (air tight packing)
400 250 g airtight packing
  4 Percentage of  Waste in Lint  
    a) Trash Content %  (IS 4871) 500 300 g  
    b) Trash Content %  (CIRCOT SP-4) 400 150 g  
  5 HVI  Test ( HVI / ICC Mode)  ( ASTM D 5867) 200 250 g  
    Colour Grade (extra) 100  
  6 Baer Sorter with diagram   (BS4044) 800 300 g  
  7 Length of Staple Fibre (as per BISFA Rules) 650 300 g  
    ( BS 6989) Oil plate method  
  8 Denier of Staple Fibre by  Cutting & Weighing 800 300 g  
    method (ASTM D -1577 )  
  9 Fibre weight per unit Length by Counting method 500 300 g  
  10 Fibre Fineness by Micronaire ( BS 3181) 100 100 g  
  11 Single Fibre Strength and elongation by INSTRON Tensile Tester  (ASTM D3822) (100 readings)
2000 300 g  
  12 Fibre Maturity by NaOH method (IS 236) 400 100 g  
  13 AFIS Test Length, Maturity, Neps, and Trash (ASTM D 5866) 800 100 g  
    Length & Maturity Module 300  
    Neps Module 300  
    Trash Module 300  
  14 Qualitative Identification of Fibres (IS 667) 300 100 g  
  15 HVI & Microspinning  (CIRCOT  Method) 3000 500 g  
  16 Full Spinning on carded cotton ( 1 count ) 5000 5.5 Kg  
    Full Spinning on carded cotton ( 2 counts ) 6000 8 Kg  
    Additional Count 2000 10 Kg  
2 TESTS ON YARN
  17 Yarn count ( IS  1315 ) 400 1 Km  
  18 Lea Test  ( IS  1671 ) 500 1 Km  
  19 Single Thread Strength and elongation by Instron 1000 1 Km  
    Individual readings (per cone) 100  
  20 Twist in Single Yarn  ( IS  832 ) 400 500 m  
  21 Twist in Double Yarn (Doubling Twist ) 400 500 m  
  22 Twist in Cards and Cables 300 500 m  
  23 Yarn  Evenness U%  with Imperfections by 1000 6 Packages  
    Uster UT-4   ( ASTM D 1425 )
  24 Yarn Hairiness by Zweigle Hairiness Tester 700 20 Km  
    (hairs of 1,2,3,4,6,8,10,12, 15, 18,21,and 25 mm ;
    Cumulatative & Differential  mode )
  25 Qualitative Identification of Fibres in Yarns ( IS 667) 300 100 g  
  26 Quantitative analysis of Fibres in Yarns (IS  3416) Upto two components 600
    Each component over two 250
3 TESTS ON WOVEN / KNITTED FABRICA
  27 Type of Weave ( CIRCOT Method ) 400 1 m / full piece  
  28 Length of Fabric  ( IS 1954) 200 Full piece  
  29 Width of Fabric ( IS 1954) 200 1 m / full piece  
  30 Thickness of Fabric ( IS 1954) 200 2 m / full piece  
  31 Weight per square or linear metre of Fabric ( IS 1964) 400 1 m / full piece  
  32 Ends & Picks / wales & Courses  ( IS 1963) 300 1 m / full piece  
  33 Count of Warp,Weft Yarn & Ply (IS 3442) 400 1 m / full piece  
  34 Fabric Strength  ( IS 1969) 800 1 m / full piece  
  35 Fabric Strength and Elongation by Instron (IS 1670 ) 1000 1 m / full piece  
  36 Water Permeability (Cone Test ) 250 1 m / full piece  
  37 Water Shrinkage %   ( IS 2977) 400 1 m / full piece  
  38 Air permeability 300 1 m / full piece  
  39 Pilling Test  ( IS 10971) 450 1 m / full piece  
  40 Tearing Strength by Elmendorf method 450 1 m / full piece  
  41 Crease Recovery (IS 4681 ) 500 1 m / full piece  
  42 Bursting Strength 300 1 m / full piece  
  43 Drape  Test (IS 8357) 500 1 m / full piece  
  44 Fabric Handle by KES-FB System 1 m / full piece  
    a) Full Test (Tensile, Shear,Bending, Compression and Surface properties )
    Woven Fabrics 7000
    Knitted Fabrics 8000
    b) Individual Module Testing
    Woven Fabrics 2000
    Knitted Fabrics 3000
  45 Thermal transport properties of fabric using Thermolabo II (KES-FB7)   1 m/full piece  
    a) q-max ( Warm/ Cool feeling) 1000
    b) Thermal Conductivity by constant heat flow method 1000
    c) Thermal Insulation by guarded hot platemethod 1000
  46 Resistance to air flow through fabric using KES-FB-AP1 Tester 800 1 m / full piece  
  47 Water Vapour Transport Rate through fabric   1 m / full piece  
    a) By Dish Method 2000
    b) By CIRCOT WVTR Apparatus 1000
  48 Vertical Wicking Test for fabric 1000 “ “  
  49 Absorbency Test for fabric 1 m / full piece  
    a) Sinking Time 500
    b) Drop Test for absorbency of textiles 500
  50 Water Repellency  - Spray Tester 350 “ “  
  51 Moisture Management Properties of textile fabrics (AATCC 195-2009) 3000 “ “  
  52 Vertical Flammability Test  ASTM D 6413-1994 1000 “ “  
  53 Inclined Flammability Test   ASTM : D 1230 -94 1000 “ “  
  54 Horizontal  Flammability Test FMVSS 302 : DIN 75200 ISO 3795 1000 “ “  
4 CHEMICAL & PHYSICO - CHEMICAL TESTS
  55 Honey Dew : Qualitative Test (fibre / Yarn) ( ICGR 11-126) 400 50 g  
  56 Honey Dew :Quantitative Test (fibre / Yarn) (CIRCOT Method) 800 50 g  
  57 Desizing or Definishing 500 50 g  
  58 Percentage of Size/Finish 750 50 g  
  59 Scouring Loss %  (IS 1383) 600 50 g  
  60 Fluidity test 900 50 g  
  61 Alkali Solubility Number 400 100 g  
  62 Ash Content 600 100 g  
  63 Water soluble matter  (IS 3456 ) 500 100 g  
  64 pH Determination  (IS 1390) 400 50 g  
  65 Oil Content of Fibre, Yarn and Fabric 800 100 g  
  66 Fluorescence Test for Optical Whiteners 250 100 g  
  67 Acidity / alkalinity 350 50 g  
  68 Wax content 800 100 g  
  69 Quantitative Blend analysis of Fabric   50 g  
    Upto 2 components 600
    additional component over two 250
  70 Qualitative Identification of Fibres in fabric (IS 667) 300    
  71 Quantitative Blend Analysis of Fabric-Warp & Weft separately 1200 0.5 m  
  72 Nature of Dye (Vat or Reactive) 800 100 g  
  73 Colour Fastness to washing (ISO 105 C 10:2006) 0.5 m  
    Test 1-3 400  
    Test - 4 600  
    Test - 5 1200  
  74 Colour Fastness to Dry Cleaning AATCC:132-1988 & ISO:105-DO1 1000 0.5 m  
  75 Colour Fastness to Light  (IS 2454 ) / AATCC 16-3 upto BWS (4) / 20 AFU      
    1 sample / 2 samples each / 3 or more samples each upto BWS (5)

2800/

1700/

1000

0.5 m  
    1 sample / 2 samples each / 3 or more samples each upto BWS (6)

3600/

2100/

1300

0.5 m
    1 sample / 2 samples each / 3 or more samples each

7000/

4100/

2500

0.5 m
  76 Colour Fastness to Perspiration   ( IS 971 ) 600 0.5 m  
  77 Colour Fastness to Rubbing  (IS 766 ) 400 0.5 m  
  78 Colour Fastness to Bleaching ( IS 762 ) 500 0.5 m  
  79 Colour Fastness to hot pressing (IS 689) 750 0.5 m  
  80 # Colour Fastness to dry heat 600 0.5 m  
  81 Ultra-Violet Protection Factor (UPF) 800 0.5 m  
  82 Proofing content (IS 6803) 1100 100 g  
  83 Limiting Oxygen Index (IS 13501) 1600 0.5 m  
  84 K/S value (L*,a*,b*,C,H) 600 0.5 m  
  85 DSC - 35o - 350o 5o/min   5 g  
    1 sample 7500
    2-3 sample each 4000
    4-and more samples each 3000
    below 35o C - per 10o (extra) 250
    Above 350o C - per 50o (extra) 100
  86 Solvent Extractable 800 50 g  
  87 # Oil Repellency (AATCC TM 118) 1500 0.5 m  
  88 # Alcohol Water Repellency (AATCC TM 193) 1000 0.5 m  
  89 # Chlorite test IND/TC/0048(C) 700 0.5 m  
  90 # Hydro Test IND/TC/0048(C) 700 0.5 m  
  91 # Levelling Test IND/TC/0048(C) 1000 0.5 m  
  92 # CF to Water IND/TC/0048(C) 400 0.5 m  
  93 # CF to Acid & Alkalis (AATCC TM 6) 1500 0.5 m  
5 MICROBIOLOGICAL TESTS
  94 Anti Fungal Activity 1 m  
    AATCC 30 - Test II & III 1500
    Test IV (14 days) 1800
    Test IV (28 days) 2500
  95 # Antibacterial activity  (ASTME-249) per culture 1500 10 g  
    AATCC 147 (Qualitative) 1100 0.5 m  
    AATCC 100 (Quantitative) 2200
  96 Total Bacterial and Fungal Count 800 50g /500 ml  
  97 # Agar diffusion Test (per culture) 500 10 g  
  For antibacterial & Anti fungal activity
  98 Lyophilization  Upto 250 ml of Liquid 2500    
    Every additional 250 ml  
    Total Solid Content of Liquid   Upto 10% 2000
    Total Solid Content of Liquid  11% to 20 % 1500
    Total Solid Content of Liquid   21% and above 1000
6 TESTS ON COTTON SEED
  99 Oil content 800 250 g  
  100 Hull and Kernel Percentage 500  
  101 Protein content (Acid Delinting ₹500  extra) 750  
  102 Free Gossypol Content 1200  
  103 Total Gossypol Content 1200  
  104 Crude Fibre content 1400  
  105 # Linter % 500  
7 TESTS ON COTTON LINTERS
  106 Alpha-Cellulose Content (with purification) 2000 250 g  
  107 Purification of Linters (Cleaning, Kiering & Bleaching) 1400
  108 Cellulose yield 1200
  109 Ash content 600
  110 Acid Insoluble Ash 700
  111 Ether Soluble Matter 800
  112 Iron content in Ash 1000
  113 Lignin Content % 3000
8 TEST ON ABSORBENT COTTON
  114 Sulphated Ash (Indian Pharmacopoeia) 800 250 g  
  115 Water Soluble Matter (Indian Pharmacopoeia) 650
  116 Water Holding Capacity (Indian Pharmacopoeia) 450
  117 Sinking Time (Indian Pharmacopoeia) 450
  118 Fluorescence Under UV Light (Indian Pharmacopoeia) 250
9 PULP AND PAPER TESTING
  119 Fibre Length (Tappi - T233) 1000 250 g  
  120 Freeness CSF (Tappi - T227) 1000
  121 Freeness SR Degree (Tappi - T227) 1000
  122 Consistency (Tappi - T240) 500
  123 Kappa Number (Tappi - T 236) 2200
  124 GSM  (IS-1060) 300 12 paper full size  
  125 Thickness  (IS-1060) 300
  126 Bulk (IS-1060) 300
  127 Size Measurement  (IS-1060) 200
  128 Brightness %  (IS-1060) 500
  129 Opacity %  (IS-1060) 500
  130 Smoothness  (IS-1060) 500
  131 Porosity  (IS-1060) 500
  132 Cobb %   (IS-1060) 400
  133 Bursting Strength  (IS-1060) 500
  134 Tearing Strength   (IS-1060) 500
  135 Tensile Strength    (IS-1060) 600
  136 Breaking Length   (IS-1060) 600
  137 Gloss %   (IS-1060) 500
  138 Stiffness   (IS-1060) 500
  139 Water Absorbency   (IS-1060) 400
  140 Double fold  (IS-1060) 500
  141 Feathering   (IS-1060) 400
  142 # pH 400
  143 # Ash 600
10 BOARD TESTING (IS 3087)
  144 Density 500    
  145 Moisture % 500
  146 Water Absorption 500
  147 Swelling in Water 500
  148 Modulus of Rupture 2000
  149 Adhesion Test /Internal bond strength 2000
  150 Screw/Nail withdrawal 2000
  151 Tensile Strength 1000
11 WATER  ANALYSIS
  152 COD Analysis 800 500 ml  
  153 BOD Analysis 1200 500 ml  
  154 Conductivity 300 500 ml  
  155 TDS 300 500 ml  
  156 pH 350 500 ml  
  157 Salinity 300 500 ml  
  158 Analysis of Sodium/ Potassium/ Calcium content of water by Flame Photometer (per element) (Rs. 500/- extra for digestion if required 300 500 ml  
  159 # Analysis of Heavy Metals by AAS per metal 450
12 # TESTS ON ACTIVATED CARBON
  160 BET Surface area analysis 3000 5 gram  
  161 Methylene Blue number of activated carbon [BIS 877 - 1977] 400 5 gram  
  162 Iodine Number of activated carbon [ASTM D4607-94] 1500 5 gram  
  163 Compressive Strength [ASTM C 695] 3000 5 gram  
13 SPECIAL TESTS
  164 HPLC scanning (Qualitative) 2000 10 g  
  165 FTIR scanning   (Qualitative) (only scan)
1500 10 g  
    KBr method 1800  
  166 UV absorbance/transmission scan (water soluble) 400 0.5 m  
  167 # UV absorbance/transmission scan (solvent soluble) 500 0.5 m  
  168 Elemental Analysis by AAS (per element) (₹ 500 extra for digestion) 450 100 g  
  169 Scanning Electron Microscope (Maximum 4 micrographs)      
    Surface morphology 2500
    Cross section 3000
  170 AFM Imaging 5000    
  171 Light micrograph / Photomicrograph (₹500 extra for Sample Preparation/Staining) 1000    
    (10x, 40x and 100x magnifications)
  172 Particle Size Analysis / Zeta Potential
(Sample in suspension only
3000 10 ml / 100 mg  
    (Nano Size by DLS analysis)
  173 XRD Radial Scan (Data in electronic format:
500 mg Data in electronic
    4º-50º 2000 in powder format
    4º-80º 3000 form per sample
  174 X-ray Orientation( Texture) Scan 4500 10 g  
  175 X-ray Fluorescence Spectrometry   20 g  
    a) Pressed Pellet Method  
    i)Qualitative Scan ( upto 5 Elements) 4500
    Additional each element 600
    ii) Full Scan 10500
    b) Liquid analysis Under Helium Medium  
    i) Qualitative Scan 4700
    ii) Full Scan 13000
  176 Electrical Resistance of Textile Materials, Thin films etc. by Electrometer (6517A) 2000 0.5 m  
  177 Surface Tension / Contact angle 2000 50 g  
  178 Friction coefficient (fibre to fibre, fibre to metal) 2000 1 m  
#New Test added

Additional Information                   
    1.  Minimum charge per test report ₹ 250/-               
    2.  Rates are exclusive of GST etc.               
    3.  Total charges to be rounded to the nearest Rupee.               
    4.  Payment to be made through DD favouring DIRECTOR, CIRCOT payable at Mumbai / E Transfer.               
    5.  For further Details contact Incharge, Test House               
                   
Telephone: 022-24127273, 24127276, 24184274, 24184275 Ext. 456 / 457                   
e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it. , This email address is being protected from spambots. You need JavaScript enabled to view it..       

 

 

 

Last modified onWednesday, 06 June 2018 10:59
back to top

About CIRCOT

Research

Services

Publications

Announcement

Other Links

  • kaçak bahis - bahis